Basic Water Chemistry Comparison between 2 or more Samples

£125.00 exc. VAT

This analysis is for the comparison of 2 or more samples to establish if they appear to be from the same source or are different.

Test includes:

  • pH
  • Total Hardness
  • TDS
  • Calcium Hardness
  • Conductivity
  • M. Alkalinity
  • Chloride

Cost of analysis is per sample, there is a minimum or 2 samples required to compare.

Basic water chemistry test can be ordered on its own here.

The lab will require a full 1l bottle to perform each analysis.

Lead Time: Up to 12 working days

Description

BULK BUY DISCOUNTS AVAILABLE
Buy 6-10 samples, pay only £74.7 per packet
Buy more than 11 samples, pay only £70.55 per packet

Comparison of Basic Water Chemistry on 2 or more Water Samples

This analysis covers the most commonly measured parameters for determining the scaling and corrosive tendencies of water for industrial and commercial applications but can also be used to compare two or more samples of water to figure out if they come from the same source. This may be especially useful for pinpointing the origin of an unknown water sample against other samples you may suspect are the source.

The lab will then comment on whether the water samples are likely to have come from the same source or appear to be too different in nature.

Test includes:

  • pH
  • Total Hardness
  • TDS
  • Calcium Hardness
  • Conductivity
  • M. Alkalinity
  • Chloride

Kit contains:

  • 1x 1L sample bottle per sample (minimum of 2)
  • 1x return jiffy bag and pre-paid return label
  • 1x Analysis sticker to filled in

Lead Time: Up to 12 working days. If results are needed urgently then please contact us.

Other Tests

Servicing options and contracts available

Take advantage of Feedwater’ servicing options and contracts when you buy our chemical products.

Chemistry and other Micro Sample Kits available

Additional information

Weight 0.10 kg

You may also like…