Corroban 40 Nitrite Corrosion Inhibitor

£215.00 exc. VAT

  • Traditional nitrite based inhibitor
  • Cost effective
  • Excellent protection
  • Protects steel, cast iron, copper & brass
  • Not recommended for aluminium
  • Suitable for chilled water, LTHW systems

Safety Data Sheet emailed upon order.

For business and contractors use only.
Product unsuitable for public & domestic usage.

Save money with our complete nitrite protection bundle, Corroban 40, Biocide & Nitrite Test Kit Click Here

Description and usage instructions below.

Description

BULK BUY DISCOUNTS AVAILABLE
Buy 5-10 drums, receive a 10% discount
Buy more than 11 drums, receive a 15% discount

Corroban 40 closed system corrosion inhibitor

25KG drum (Liquid chemical)

  • Traditional nitrite based inhibitor
  • Cost effective
  • Excellent protection
  • Protects steel, cast iron, copper & brass
  • Not recommended for aluminium
  • Suitable for chilled water, LTHW systems

Product description

CORROBAN 40 is a nitrite-borate based corrosion inhibitor containing an additional organic inhibitor to protect steel, copper and other non-ferrous metals. As such CORROBAN 40 is an ideal treatment for closed chilled water and low pressure heating systems.

Corroban 40 is an extremely strong passivator of exposed or corroded metal surfaces.

CORROBAN 40 is NOT intended for use in systems containing Aluminium or galvanised pipework.

Dosage rate

5 – 7 litres / 1000 litres of system water and make-up

Normal treated water control limits

pH 8.5 – 10.5

Nitrite: 1200mg/l min.

TDS: 2500mg/l max.

TVC: 103 cfu/ml max.

How to use it

Corroban 40 should be added to the system at an initial dosage rate of 7 litres / 1000 litres of system water content. This will passivate metal and should establish the required minimum Nitrite reserve of 1200mg/l. Whenever the system is drained or loses a significant quantity of water then the additional Corroban 40 should be added at the rate of 5 – 7 litres / 1000 litres.

The active inhibitor reserve can be measured using a simple nitrite closed system testkit.

Other recommendations

In order to control potentially problematic microbial contamination it is recommended for chilled water and LTHW applications that the system is also dosed initially with Biocide ITA at the rate of 200 – 500ml / 1000 litres and that is repeated once every 3 months. The microbial activity (TVC) in the system can be monitored using microbial dipslides.

It is generally recommended that new closed systems are pre-commission cleaned prior to adding a corrosion inhibitor – our product Corrosperse 84 is ideal for this and can also be used to restore heat transfer and flow to older systems.

Chemical addition is made easier using a chemical dosing pot.

Servicing options and contracts available

Take advantage of Feedwater’ servicing options and contracts when you buy our chemical products.

Help & Advice on choosing your corrosion inhibitor

Additional information

Weight 25 kg
Weight

,

You may also like…